---

History • FAQ • Order • Tooling & Techniques • Safety • Gallery • Home

---

Thickness measurements are somewhat approximate; in some cases, rods may be slightly bent due to shrinkage during curing (this should be much less of an issue for our next production run).  If you have need of thicker stock - 7/8" and up - get it now!  Curing time for this material is so long that we do not plan on making it again.

Please note that shipments of celluloid are much more likely to be delayed than shipments of hard rubber.  We maintain large stocks of precut hard rubber, but currently keep much smaller stocks of precut celluloid.  When precut blanks of a given material are sold out, it may be up to a week before our next cutting session.  Setting up and taking down the big wet saw is a burdensome operation, which we are planning on streamlining as soon as possible.

---

5600: Purple Web (click here for more info)	Quantity
10" x 5/8" x 5/8" (0.63" square ≈ 16mm)		$20
10" x 7/8" x 7/8" (0.87" square ≈ 22mm)		$35

---

5050: Ivory (click here for more info)	Quantity
10" x 7/8" x 7/8" (0.90" square ≈ 23mm)		$40
10" x 31/32" x 31/32" (0.97" square ≈ 24.5mm)		$50
9" x 9" x 1/2" slab		$150

---

---

5780: Transparent Tortoiseshell (click here for more info)	Quantity
10" x 13/16" x 13/16" (0.80-83" square ≈ 21mm)		$40

---

---

5420: Green Mottled (click here for more info)	Quantity
10" x 5/8" x 5/8" (0.62" square ≈ 15.75 mm)		$20
10" x 13/16" x 13/16" (0.81" square ≈ 20.5mm)		$30

---

5080: Checkers (click here for more info)	Quantity
10" x 1/2" x 1/2" (0.50" square ≈ 12.5mm)		$15

---

8820: Acetate marble seconds (click here for more info)	Quantity
10" x 1/2" x 1/2" (0.50" square ≈ 12.5mm)		$3

---

Home • Info/Contact • Terms of Sale/Disclaimer • View Cart

Celluloid • Casein • Bakelite • Hard Rubber • Acrylic • Books

---

Copyright © 2010-2011 American Art Plastics. All rights reserved.